Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Left Rear Door Panel on a Toyota Rav 4

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Door trim panel

See other generations:
Video tutorial

Remove the battery terminals located in the engine bay. Remove the trim near the opening lever; using a screwdriver, unscrew the screws inside the handle (after removing the trim). Unscrew the remaining screws on the door panel and detach the retaining clips.

Finally, pull the panel away from the door with your hands (disconnect the power wiring and the opening cable). Refit the door panel after maintenance.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel on a Toyota RAV 4
How to Remove the Rear Door Panel on a Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Below are the instructions that will allow you to remove and replace the rear door panel on the Toyota RAV 4 in simple and quick steps. First, open t…
How to Repair the Door Lock on a Toyota RAV 4
How to Repair the Door Lock on a Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) This guide outlines the steps to dismantle and repair the door lock on a Toyota RAV 4. First, open the front door and start removing the door panel b…
Remove the Left Front Door Panel on Toyota Rav 4
Remove the Left Front Door Panel on Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Remove the left front door panel on a Toyota Rav 4: disconnect the battery terminals located in the engine bay, using a screwdriver, undo the screws …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos