Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : Removing the left front door panel on Toyota Rav 4

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Door panel
Operation: Removing the left front door panel on Toyota Rav 4

We perform the disassembly of the left front door panel on Toyota Rav 4: disconnect the battery terminals in the engine compartment, with a screwdriver we unscrew the screws located in the space of the upper lever of the door opening and the screws present in the handle (after removing the plastic piece of cover). Remove the plastic covering near the lock (if present), unscrew the screws left on the door panel and detach the fastening clips of the same. Finally we detach the panel and unhook it from the door (we disconnect the power cables and the opening cable). We carry out the desired maintenance inside the door.


Posted on 9 November 2023 by ScegliAuto



Removing the Toyota Rav door panel 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Let's see in this video how to remove the front door panel of the Toyota Rav 4, following these simple steps. First we open the front door and start
How to repair the door lock of the Toyota RAV 4.
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Let's see in this guide the steps that will allow us to disassemble and repair the door lock of the Toyota RAV 4. First, we open the front door and s
How to disassemble the outer door handle of the Toyota RAV 4
Toyota Rav 4 (2019-2024 / MK 5, Xa50) In this short and simple guide, we will see how to disassemble and replace the external handle of the front door of the Toyota RAV 4. First of all, w

Other guides that may interest you

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos