Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Speedometer/Tachometer on Toyota Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Onboard computer

See other generations:
Video tutorial

In this very simple video, you will learn how to remove the tachometer and speedometer from a first-generation Toyota Yaris. Get into the car and start by forcefully pulling off the plastic trim of your speedometer, as shown in the video: disconnect the electrical connector to remove it completely.

Unscrew the four side screws and remove the display part, unclipping the electrical connectors: be very careful not to damage the electronics, so handle with care. If you wish, you can also change the display bulbs, as shown in the video!


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Set the Clock on the Toyota Yaris Instrument Cluster Display
How to Set the Clock on the Toyota Yaris Instrument Cluster Display
Toyota Yaris (2011-2019 / Xp130) This guide describes the procedure for setting the clock on the instrument cluster display for the Toyota Yaris, second series. Follow these steps in…
How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Start by opening the bonnet of your Toyota Yaris by pulling the designated release handle located at the bottom left of the steering column. Next, un…
Removing the Car Radio from a Toyota Yaris
Removing the Car Radio from a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today, you will see the steps to remove the car radio from a second-generation Toyota Yaris. First, get inside the car and remove the side trims and …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos