Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Brake Light on Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part:

See other generations:
Video tutorial

Removing the third brake light on the Yaris? Here’s how to do it. Open the tailgate, and remove the plastic covering the rear light. Unscrew the retaining screws located on the sides using a socket wrench.

Disconnect the rear light and unplug the electrical connectors. Connect the power connector to the new third brake light, secure the light in the tailgate (after installing the bulbs), and screw in the retaining pins.

Cover the third brake light with the plastic cover. Finally, test the correct operation of the lights installed in the rear light.

Get into the vehicle and perform the test.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to change the brake light on the Toyota Yaris MK1
How to change the brake light on the Toyota Yaris MK1
Toyota Yaris (1999-2005 / Xp10) In this video we can see how to change the brake light of the Toyota Yaris MK1: to access the rear light, we need to open the tailgate, and at the co…
What to Do If the Third Brake Light Makes Noise on Your Toyota Yaris
What to Do If the Third Brake Light Makes Noise on Your Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Let’s see how to remedy a problem affecting some models of the Toyota Yaris. In fact, there are some models where - perhaps due to a defect in the as…
Replacing Brake Lights on Toyota Yaris
Replacing Brake Lights on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In today's video tutorial, we will see how to remove and replace the bulbs of the rear brake lights on a Toyota Yaris. First, open the boot and remov…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos