|
Do it yourself
| |||
| ||||
How to Replace the Front Bulb of a Toyota Yaris
Model: Toyota Yaris
Xp10
- Years:
1999, 2000, 2001, 2002, 2003, 2004, 2005
Video tutorial
Before you start, open the front bonnet of your Toyota Yaris. Doing so, you will notice the cover of the blown bulb in the lower left corner of the engine bay. Begin by disconnecting the relevant connector by simply pulling it towards you. Then, remove the plastic rear cover of the bulb by also pulling it towards you. Once you have removed the rear cover, you will have accessed and freed the bulb. To remove it from its housing, simply pull it out, and you will have completed the disassembly. At this point, to fit the new bulb and close everything up, repeat these steps in reverse, and the replacement will be complete.
Updated on 2 April 2026 by ScegliAuto
Related tutorials
Toyota Yaris
(2011-2019 /
Xp130)
Today we will explain how to replace the front headlight bulb of the Toyota Yaris in less than 60 seconds. To perform this simple operation, we first…
Toyota Yaris
(2005-2011 /
Xp90)
This guide will outline the steps and instructions for removing and replacing the front headlamp bulb on the Toyota Yaris. First, open the bonnet of …
Toyota Yaris
(2011-2019 /
Xp130)
Let’s discover the steps to remove and replace the front headlight bulb on a Toyota Yaris. First, open the bonnet of the vehicle and start by removin…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Remove the Rear Seats from the Fiat Tipo
In this guide, you will see the main instructions useful for removing the rear seats from the Fiat Tipo, taking out the rear seat and, if necessary, the backrests. First, open the rear doors of the vehicle and start pulling the rear seat upwards until it detaches and can be removed from the cabin; then unscrew the screws and bolts found at the base of the backrests if you also want to remove them, as shown in the video. At this point, clean or repair the rear seats, reassembling them and restoring their original position, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |