Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Side Indicator Light on a Toyota Prius

Model: Toyota Prius Xw30, MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Side marker light

See other generations:
Video tutorial

First, adjust the mirror to access the screw located behind it concerning the side indicator light, as shown in the video. Next, remove the rear cover: to do this, use a plastic wedge or a small flat-head screwdriver to pry in the surrounding gap until the cover is removed.

Now unscrew the two rear screws that secure the indicator light support, disconnect the connector, and it will be free. At this point, open the indicator light by replacing the bulb or replace the entire unit by fitting the new one.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

How to Remove the Dashboard Instrument Cluster on Toyota Prius
How to Remove the Dashboard Instrument Cluster on Toyota Prius
Toyota Prius (2016-2023 / MK 3, Xw50) Today, we will see the instructions that will allow you to remove and replace the dashboard instrument cluster on the Toyota Prius. First, get inside…
Dismantling and Replacing the Rear Light
Dismantling and Replacing the Rear Light
Toyota Prius (2009-2015 / Xw30, MK 2) Open the rear bonnet and remove the trim panel of the boot floor. Then, remove the side trim panels inside the bonnet (it is necessary to also remove…
How to Reset the Oil Light on a 2018 Toyota Prius
How to Reset the Oil Light on a 2018 Toyota Prius
Toyota Prius (2016-2023 / MK 3, Xw50) In this video, you will see the procedure to reset the oil light on the 2018 Toyota Prius. This procedure is very simple and quick. First, start the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos