Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Tyre Pressure Warning Light on Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

In this short and simple video tutorial, you will learn how to reset the tyre pressure warning light on a Toyota Yaris. Before performing the reset operation, ensure that you have resolved any issues related to the pressure variation of one or more tyres that caused the warning light to illuminate.

Then, get inside the car and turn on the ignition: now press the "set" button located below, as illustrated in the video. Hold it down until the warning light resets and disappears from the dashboard; then turn off and back on, checking that the light has reset correctly!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Warning Light on the Toyota Yaris
Resetting the Tyre Pressure Warning Light on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) This short guide shows the procedure to reset the tyre pressure warning light (TPMS) on the Toyota Yaris; before performing the operation, ensure all…
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure warning light on the Toyota Yaris, first inflate the tyres to the correct pressure value, which is indicated on the sticke…
How to Reset the Tyre Pressure Warning Light on a Toyota Yaris?
How to Reset the Tyre Pressure Warning Light on a Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure warning light on a Toyota Yaris, first inflate the car's tyres to the recommended pressure value: this value is written on…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos