Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the glow plugs on a Toyota Rav4

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: Glow plugs

Lift the bonnet and place the appropriate support rod. Unscrew the screws of the clamps related to the engine air ducts and disconnect them. Then unscrew the three 12 mm bolts that secure the filter box located above the engine compartment. Now, tackle the five screws that secure the engine cover itself. Here are the sought-after glow plugs! Be aware that they can be quite difficult to unscrew and remove, so take care not to damage them. Work slowly during the replacement, as shown in the video. Once replaced, reassemble everything in reverse order. Good luck!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the glow plugs in the Toyota RAV4 2.0 diesel?
How to replace the glow plugs in the Toyota RAV4 2.0 diesel?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) In this tutorial, you will see how to replace the glow plugs in the Toyota RAV4 2.0 diesel, a straightforward operation that requires good manual ski…
Replacing the Rear Light of the Toyota RAV4
Replacing the Rear Light of the Toyota RAV4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) Below are the main instructions for removing and replacing the front light and its bulbs of the Toyota RAV4. First, open the rear tailgate and start …
How to replace the headlight bulb of the Toyota RAV4
How to replace the headlight bulb of the Toyota RAV4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) To correctly replace the headlight bulb of your second generation Toyota RAV4, you need to follow the steps described in this new mini guide. First o…

Other guides you may be interested in

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos