Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Shoes on a Toyota Yaris MK2

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Brake pads

In this video tutorial, you will see how to remove and replace the rear brake shoes on the second series Toyota Yaris. First, lift the vehicle at the rear and start by removing the wheel; then remove the rear drum by screwing in the two screws that act as extractors, as shown in the video. At this point, remove the two springs and take out the two rear shoes; clean off any residual dirt and then proceed to fit the new shoes, of the correct type and high quality, following the video tutorial to the end!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Shoes on the Toyota Yaris
Replacing the Rear Brake Shoes on the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) In today's tutorial video, you will see how to remove and replace the rear brake shoes on the Toyota Yaris by following these simple steps. First, li…
Drum Brake Shoe Replacement on Toyota Yaris
Drum Brake Shoe Replacement on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Replace the drum brake shoes on your Toyota Yaris. Lift the car on a column jack to the desired height, then remove the wheel (using a telescopic spa…
Drum Brake Shoe Replacement
Drum Brake Shoe Replacement
Toyota Yaris (1999-2005 / Xp10) Replacing drum brake shoes is an essential task, especially after covering thousands of miles. Installing new brake shoes is not difficult or tiring;…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos