Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Toyota Rav 4

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Tire pressure warning light

See other generations:
Video tutorial

In this video, you can see how to reset the tyre pressure light on a Toyota Rav 4 using a few simple steps. If you notice that the tyre pressure light has illuminated, it means the sensor has detected a pressure lower than the starting level.

First, ensure the vehicle is safe to check the tyre pressure with a gauge. The vehicle must be stationary and the engine off; engage the handbrake and put the gear lever in neutral.

Check the pressure of all tyres and inflate if necessary. Once this step is complete and all tyres are inflated to the correct pressure as indicated on the label inside the vehicle's door, get in the vehicle, turn on the ignition, and the reset should occur automatically.

At this point, the light should no longer be illuminated.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure light on the Toyota RAV 4?
How to reset the tyre pressure light on the Toyota RAV 4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) On the Toyota RAV 4, the tyre pressure light can be cleared by inflating the tyres until they reach the optimal pressure value, which is indicated on…
How to Reset the Tyre Pressure Light on a Toyota RAV 4
How to Reset the Tyre Pressure Light on a Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To reset the tyre pressure light on a Toyota RAV 4, first ensure the tyres are inflated to the correct pressure value: this value is indicated on the…
How to Reset the Tyre Pressure Light on a Toyota RAV 4?
How to Reset the Tyre Pressure Light on a Toyota RAV 4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To reset the tyre pressure light on a Toyota RAV 4, turn on the ignition by pressing the ignition button located on the right side of the steering wh…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos