Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Toyota Corolla

Model: Toyota Corolla MK 2 - Years 2000-2007
Part:

Today, resetting the tyre pressure warning light on a Toyota Corolla is very simple, and now you will see how to do it. Turn on the ignition and look at the screen to the right of the speedometer. Scroll through the various sections of the menu until you reach the vehicle settings page. Go to this section, then click on TPWS. After entering the tyre pressure page, click on "Adjust Pressure" while holding the "OK" button for a few seconds. Remember that before resetting the TPWS light, you must check the condition of the tyres.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Toyota Corolla?
How to Reset the Tyre Pressure Light on a Toyota Corolla?
Toyota Corolla (2019-2026 / MK 5, E210) You can reset the tyre pressure light displayed on the instrument panel of the Toyota Corolla by first inflating the tyres until they reach the recom…
How to reset the tyre pressure warning light of the Toyota Corolla?
How to reset the tyre pressure warning light of the Toyota Corolla?
Toyota Corolla (2019-2026 / MK 5, E210) To clear the tyre pressure warning light from the instrument panel of the Toyota Corolla, first inflate the tyres to the optimal pressure value: this…
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla?
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla?
Toyota Corolla (2013-2019 / MK 4, E170, E160) To reset the tyre pressure warning light on a Toyota Corolla, turn the ignition on by rotating the key in the ignition switch. Once the dashboard is …

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos