Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlamp Bulb on Toyota Auris

Model: Toyota Auris E180 - Years 2012-2018
Part: Headlight bulb

In this video tutorial, you will learn how to remove and replace the front headlamp bulb on a second-generation Toyota Auris. First, open and lift the bonnet of your car; then remove the plastic protective cap found at the back of the headlamp and pull out the bulb holder along with the bulb, as shown in the video. At this point, remove the old bulb and replace it with the new one of the correct type (in this case, an HIR2). Finally, insert it in the correct orientation and reassemble everything by turning it and securing it in the front headlamp.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on the Toyota Auris
How to Replace the Front Headlight Bulb on the Toyota Auris
Toyota Auris (2012-2018 / E180) To replace the front headlight bulb on the Toyota Auris, open the bonnet to access the engine compartment. This will allow you to loosen the screws s…
Replacing the headlight bulb of the Toyota Auris
Replacing the headlight bulb of the Toyota Auris
Toyota Auris (2012-2018 / E180) In today's tutorial, you will learn how to remove and replace the headlight bulb of the Toyota Auris. First, open the bonnet of your car and start by…
Replace the Headlight Bulb on a Toyota Auris
Toyota Auris (2012-2018 / E180) Today, you will learn how to replace the headlight bulb on a Toyota Auris. First, open the bonnet and locate the rear part of the headlight that cont…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos