Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Auxiliary Belt on Toyota Avensis VVT-i

Model: Toyota Avensis MK 1, T220 - Years 1997-2003
Part: V-belt

In this video, we will see the instructions for removing the auxiliary belt on a Toyota Avensis powered by VVT-i, following these instructions. First, open the bonnet; then, using a spanner, loosen the tensioner of the auxiliary belt, as shown in the video. At this point, remove the auxiliary belt and replace it with a new one of the correct type. Finally, insert it correctly by turning the pulleys by hand; then operate the tensioner to complete the replacement, as illustrated in the video!

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on the Toyota Avensis D-4D
Replacing the Timing Belt on the Toyota Avensis D-4D
Toyota Avensis (2003-2008 / T250, MK 2) Today, we will explore how to remove and replace the timing belt on the Toyota Avensis D-4D. First, lift the vehicle and begin by removing the serpen…
How to Remove and Replace the Alternator of the Toyota Avensis
How to Remove and Replace the Alternator of the Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) Today's instructions will show you the main steps to remove and replace the alternator of the Toyota Avensis. First, raise the vehicle and remove the…
Instructions for Replacing Auxiliary Belt
Instructions for Replacing Auxiliary Belt
Toyota Avensis (1997-2003 / MK 1, T220) The auxiliary belt, which also drives the alternator, is tensioned by the adjustment system located under the alternator. To replace the belt, you ne…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos