Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Headlight on a Toyota Tacoma

Model: Toyota Tacoma MK 2, N220, N240, N250, N260, N270 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight

See other generations:
Video tutorial

In this guide, you will learn how to replace the front headlight on a Toyota Tacoma. The first step is to remove the grille: to do this, unscrew two 10 millimeter bolts and detach two clips, as shown at minute 01:30, then lift the grille out of its support.

On the sides of the headlight, near the bumper, there will be another clip to detach; this will allow you to unclip the lower joint of the headlight. Now work on the bumper by removing three clips on the upper edge and two bolts at the intersection with the headlights.

The next area to work on will be the front tire: remove one screw in the tire well, in the area behind the headlight, move the rubber panel, and unscrew the headlight bolt, shown at minute 3:15. Finally, the last screws to remove will be the upper ones that secure the headlight to the engine compartment frame.

After completing these operations, you can detach the connectors and pull out the piece.

Replace it with the new one, ensuring that every part aligns correctly with the support. At this point, proceed with reassembly, and the replacement will be complete.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

Toyota Tacoma (2016-2026 / N300) In this guide, discover how to replace the headlight bulbs in a Toyota Tacoma. To start, remove the two screws on the side of the headlight, as shown…
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) In this video, see how to remove and replace the headlight assembly or front headlight of the second generation Toyota Tacoma by following these simp…
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) To replace the front headlight in a Toyota Tacoma, open the hood and loosen the screws that secure the front grille in the center, connecting it to t…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos