Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Toyota Corolla

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

First, when the tyre pressure light comes on in your car, check for any punctures in the tyres and measure the pressure with a suitable gauge. If everything is correct, proceed to reset the warning.

To do this, turn on the ignition but not the engine (it is not necessary) and simply press the reset button: for those who do not know, it is located in the glove compartment, as clearly shown in the video. Hold it down for a few seconds (about five) and you're done.

Nothing could be easier! Check that the reset has been successful.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a 2017 Toyota Corolla
How to Reset the Tyre Pressure Light on a 2017 Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) In this video, you will see how to reset the tyre pressure light that appears on the instrument panel of a 2017 Toyota Corolla; before performing thi…
How to Check and Reset the Tyre Pressure Light of the Toyota Corolla
How to Check and Reset the Tyre Pressure Light of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) In this guide, you will discover how to check and then reset the tyre pressure light of the Toyota Corolla; before registering the TPMS sensors, it i…
How to reset the tire pressure light on a Toyota Corolla?
How to reset the tire pressure light on a Toyota Corolla?
Toyota Corolla (2019-2026 / MK 5, E210) To reset the tire pressure warning light on a Toyota Corolla, turn on the instrument panel without starting the engine. Locate the tire pressure rese…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos