Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Coil

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Fuel injectors

See other generations:
Video tutorial

Replacing the ignition coil in your car is not a complicated task. You can do it yourself without the help of a mechanic.

The coil's job is to supply the spark plugs with the necessary current to generate the spark to start the engine. If the engine does not start, it means the coil needs replacing.

To remove it, disconnect the negative terminal of the battery, detach the connector, and then remove the screw that holds the coil in place. The next step is to install the new coil, ensuring you have purchased a model similar to the previous one.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to Replace an Ignition Coil on a Toyota Yaris XP10
How to Replace an Ignition Coil on a Toyota Yaris XP10
Toyota Yaris (1999-2005 / Xp10) This guide shows how to replace a damaged ignition coil on a Toyota Yaris XP10. The first step, if you have a diagnostic device, is to connect it to …
How to Maintain Spark Plugs
How to Maintain Spark Plugs
Toyota Yaris (1999-2005 / Xp10) Here is a video tutorial explaining how to maintain (or replace) the spark plugs in a Toyota Yaris. Here’s what you need: a ratchet with a 10mm socke…
How to Replace the Spark Plugs on a Toyota Yaris?
How to Replace the Spark Plugs on a Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) To replace the spark plugs on a Toyota Yaris, open the bonnet to access the engine bay and remove the bolts securing the plastic cover on top of the …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos