Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset a Toyota Yaris.

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Warning light – error code

In this video, discover how to reset a Toyota Yaris. Start by pressing the button below the fuel gauge, shown at minute 0:45, until you reach the "trip" menu. At this point, switch off the ignition. Now, press and hold the button while turning the ignition back on. You will see the warning light flashing as the reset occurs. The procedure will take about 5 seconds. When the light stops flashing, the procedure is complete. When you start the car, the service warning will no longer appear.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light in the Toyota Yaris?
How do you reset the tire pressure warning light in the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) Even the Toyota Yaris, in its most recent versions, is equipped with tire pressure monitoring sensors. They are installed in the tire and signal when…
How to reset the "Service" light on a Toyota Yaris?
How to reset the "Service" light on a Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) Good morning, today we will focus on the procedure to reset the "Service" light of our Toyota Yaris. Before proceeding, it is essential to make sure …
How to Reset the Tyre Pressure Light on a Toyota Yaris?
How to Reset the Tyre Pressure Light on a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) Good morning, today’s goal is to reset the tyre light on our Toyota Yaris. Start by sitting in the driver’s seat of the car. Next, turn on the igniti…

    Frequently Asked Questions

    • Yaris 2020-2027 - What are the Toyota Yaris warning lights? Read answer
    • Yaris 2005-2011 - What does the Cool light on the Toyota Yaris mean? Read answer
    • Yaris 1999-2005 - What does the "engine failure" light on my Toyota Yaris mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos