Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light in the Toyota Highlander?

Model: Toyota Highlander Xu50 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

In this tutorial, you will see how to reset the service light in the Toyota Highlander. This simple and quick operation should only be performed after completing all required maintenance tasks.

First, turn on the ignition, then set the trip display to "TRIP A" using the button located below the fuel gauge. At this point, turn off the ignition and turn it back on while holding the same button, which you will release after the maintenance light goes out. Finally, restart the ignition to check that the procedure has been completed successfully.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Toyota Highlander?
How to Reset the Service Light on a Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) Resetting the service light on a Toyota Highlander, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure …
How to reset the service in the Toyota Highlander?
How to reset the service in the Toyota Highlander?
Toyota Highlander (2020-2026 / Xu70) In this tutorial, we can see how to reset the service in the Toyota Highlander, an extremely simple and quick operation, to be carried out only once …
How to Reset the Service in the Toyota Highlander?
How to Reset the Service in the Toyota Highlander?
Toyota Highlander (2008-2013 / Xu40) Resetting the service in the Toyota Highlander is an extremely simple and quick operation; let's see how to proceed in this tutorial. Before proceedi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos