Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console on the Toyota Yaris?

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

To remove the centre console on the Toyota Yaris, lift the chrome part surrounding the gear lever by simply unclipping it. Next, remove the rear passenger ashtray and lift the entire console by unclipping it as well; to facilitate extraction, raise the handbrake.

To completely remove the console, you will need to take the buttons from the old console and insert them into the designated slots of the new console.

This can now be fitted and secured with its clips.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Replacing the Gear Knob on a Toyota Yaris
Replacing the Gear Knob on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Want to replace the gear knob on your Toyota Yaris? In this video, see how to remove it from the centre console. Use a plastic lever to disconnect th…
Removing the Gear Knob Gaiter on the Toyota Yaris MK1
Removing the Gear Knob Gaiter on the Toyota Yaris MK1
Toyota Yaris (1999-2005 / Xp10) In today's video tutorial, we will see the procedure to remove and replace the gear knob gaiter on the Toyota Yaris XP 10, first generation. First, g…
How to Adjust the Handbrake on a Toyota Yaris
How to Adjust the Handbrake on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) This article illustrates how to adjust the handbrake on a Toyota Yaris using a video tutorial. The procedure is simple and requires only a 10mm socke…

    Frequently Asked Questions

    • Yaris 2011-2019 - Can I replace the ignition switch on my Toyota Yaris myself? and how much is it? Read answer
    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos