Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Handbrake on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Parking brake

See other generations:
Video tutorial

This article illustrates how to adjust the handbrake on a Toyota Yaris using a video tutorial. The procedure is simple and requires only a 10mm socket wrench; it is advisable to use an extension for the socket.

To adjust the handbrake, open the rear door, remove the felt cover located in the cup holder of the centre console, then remove the fastening bolt using the socket wrench. Once removed, lift the rear part of the centre console to access the handbrake adjustment bolt.

Use the socket wrench to make the adjustment. Once the handbrake is adjusted, reposition the centre console and secure it with the previously removed bolt.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on the Toyota Yaris?
How to Adjust the Handbrake on the Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) To adjust the handbrake on the Toyota Yaris, completely remove the centre tunnel panel of the car. To do this, loosen the screw located at the back o…
How to adjust the handbrake on the Toyota Yaris?
How to adjust the handbrake on the Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) In this tutorial, you will see how to adjust the handbrake on the Toyota Yaris, a very simple and quick operation. First, park the vehicle on a flat …
How to Adjust the Handbrake Cable on a Toyota Yaris Mk3
How to Adjust the Handbrake Cable on a Toyota Yaris Mk3
Toyota Yaris (2011-2019 / Xp130) In this short video, you will see how to adjust the handbrake cable on a 2013 Toyota Yaris Mk3 in simple and quick steps. First, get inside the vehic…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos