Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Toyota Yaris xp130

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Tire pressure warning light

This guide shows how to reset the tyre pressure warning light on the 2019 Toyota Yaris. The reset procedure requires pressing the button located at the bottom of the dashboard, near the pedals. With the instrument cluster on, press and hold the reset button under the dashboard for a few seconds until the tyre pressure warning light stops flashing. Once you release the button, the light will turn off completely. Turn the instrument cluster off and back on to check that the operation has been completed correctly. Check the tyre pressures before hitting the road.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tire Pressure Monitoring System (TPMS) light on the Toyota Yaris.
Resetting the Tire Pressure Monitoring System (TPMS) light on the Toyota Yaris.
Toyota Yaris (2011-2019 / Xp130) These short and simple steps will show us how to reset the tire pressure warning light (TPMS) on the Toyota Yaris; before resetting the light, it is …
How to Reset the Tyre Pressure Light on the Toyota Yaris iA?
How to Reset the Tyre Pressure Light on the Toyota Yaris iA?
Toyota Yaris (2011-2019 / Xp130) To reset the tyre pressure light on the Toyota Yaris iA, first ensure all tyres are inflated to the recommended pressure. This value is found on the …
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris?
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To reset the tyre pressure warning light on the Toyota Yaris, you need to inflate the tyres that are at insufficient pressure. The correct pressure v…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos