Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Light on the Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

In this brief and simple guide, follow the instructions to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris. Before performing the reset, ensure all four tyres are at the correct operating pressure.

Then, get in the vehicle and turn on the ignition by pressing the button; next, press and hold the TPMS reset button located under the steering wheel until the light starts flashing and then turns off completely. Finally, switch off the ignition and then start the engine!


Updated on 17 May 2026 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Warning Light on the Toyota Yaris
Resetting the Tyre Pressure Warning Light on the Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) In this guide, we will discover how to reset the tyre pressure warning light on the Toyota Yaris; before resetting the TPMS sensors, ensure that all …
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Below is the procedure to reset the tyre pressure warning light on the Toyota Yaris. Before resetting the TPMS, ensure all four tyres are at the corr…
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) In this short and simple guide, you will learn how to reset the tyre pressure warning light on the Toyota Yaris; before performing the reset, ensure …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos