Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light on a Toyota Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: License plate light

See other generations:
Video tutorial

To replace the number plate lights on your Toyota Yaris, remove the number plate to make the job easier and avoid scratching it. Get underneath the number plate and use a small flat screwdriver to release the clip that allows you to remove the entire lamp housing where the bulb sits.

By pulling the connector, you will detach the outer plastic from the bulb.

Now remove the old bulb and replace it with the new one you purchased. You can clean the plastic lamp holder, as it is subject to water and dust.

After reconnecting the connector, refit the entire lamp into its housing, ensuring that the clip secures it firmly.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Light on a Toyota Yaris
How to Replace the Number Plate Light on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) This brief video tutorial shows the necessary steps to replace the number plate light on a first-generation Toyota Yaris, produced from 1999 to 2005.…
How to Replace the Number Plate Bulbs on the Toyota Yaris
How to Replace the Number Plate Bulbs on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Follow this guide for instructions on how to remove and replace the number plate bulbs on the Toyota Yaris. First, open the boot lid and start prisin…
How to replace the license plate light bulb on a Toyota Yaris
How to replace the license plate light bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Replacing the license plate light bulb on a 2010 Toyota Yaris is a very simple and quick operation to perform. We begin the replacement by removing t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos