Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Gear Knob on the 2013 Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Transmission

The gear knob in your 2013 Toyota Yaris is undoubtedly one of the most used components and therefore subject to wear. For this reason, it may be necessary to replace it. Here are the steps needed to carry out this operation independently. First, turn off the car completely and park it safely. Next, unscrew the gear knob by turning it anti-clockwise. Remove it and proceed to install the new gear knob. This time, rotate the new knob clockwise until it is fully tightened.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (2005-2011 / Xp90) This guide will show you how to remove and replace the gear knob on a Toyota Yaris in simple steps. First, get into the cabin and start by detaching …
Toyota Yaris (1999-2005 / Xp10) If you intend to replace the gear knob of a Toyota Yaris, first remove the currently fitted one. It is strongly advised to perform these operations w…
Toyota Yaris (2005-2011 / Xp90) Here are the necessary instructions to remove and replace the gear knob and gaiter of the Toyota Yaris. First, get in the vehicle and start by removi…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - What problems does the automatic transmission of the Toyota Yaris Hybrid have? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos