Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : How to replace the exhaust in the Toyota Yaris?

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Muffler
Operation: How to replace the exhaust in the Toyota Yaris?

In this tutorial we can see how to replace the final part of the exhaust, called the silencer, in the Toyota Yaris. First of all we will have to lift the car on a bridge or with a jack, obviously taking all the necessary safety measures. Once this is done, go under the vehicle and remove the rubber supports of the terminal, then unscrew the two bolts indicated with a 14mm socket wrench. Once the terminal has been removed, we can assemble the spare by following exactly the reverse procedure. If the rubber supports are old and worn, it is recommended to replace them with new ones in order to avoid future problems.


Posted on 11 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Yaris 2005-2011 - How much does the Toyota Yaris rear silencer cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos