Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlight Bulb on a Toyota Sienta

Model: Toyota Sienta Nph170 - Years 2015-2023
Part: Headlight bulb

How do you replace a headlight bulb on this car model? In the description below, you will find all the instructions to carry out the task. After lifting the hood, reach behind the headlight where the bulb needs to be changed. Turn counterclockwise to release the bulb holder. Then disconnect the power connector and take the new bulb, being careful not to touch the glass with your fingers. Reinstall the bulb and reconnect the power connector, and the job is done.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light on a Toyota Sienta?
How to Remove the Rear Light on a Toyota Sienta?
Toyota Sienta (2015-2023 / Nph170) In this tutorial, see how to remove the rear light on a Toyota Sienta, a very simple and quick operation, for example, if you need to replace a bulb.…
How to Change the Battery in a Toyota Sienta?
How to Change the Battery in a Toyota Sienta?
Toyota Sienta (2015-2023 / Nph170) The battery in the Toyota Sienta is located in the engine compartment and is accessible by opening the front hood of the car. You can see it immediat…
Replacing the Factory Radio with an Android Unit in the Toyota Sienta
Replacing the Factory Radio with an Android Unit in the Toyota Sienta
Toyota Sienta (2015-2023 / Nph170) In this guide, follow the steps to remove and replace the factory radio in the Toyota Sienta. First, get inside the vehicle and start by removing the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos