Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on the Toyota Highlander xu40

Model: Toyota Highlander Xu40 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

This guide shows how to reset the oil change light on the Toyota Highlander xu40. First, turn on the ignition without starting the engine and select the "TRIP A" display using the selection button on the speedometer dial. Then, turn off the ignition.

While holding the TRIP selection button, turn the ignition back on and wait for the three dashes on the instrument panel to disappear, displaying a series of zeros. Turn off and then turn on the ignition again to check that the light has reset correctly.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on the Toyota Highlander Xu40
How to Replace the Headlight Bulb on the Toyota Highlander Xu40
Toyota Highlander (2008-2013 / Xu40) Today, we will see the procedure necessary for removing and replacing the dipped beam bulb of the front headlight on the Toyota Highlander Xu40 in si…
Replacing the cabin air filter on the Toyota Highlander Xu40
Replacing the cabin air filter on the Toyota Highlander Xu40
Toyota Highlander (2008-2013 / Xu40) Today we will see, in this video tutorial, how to remove and replace the cabin air filter on the Toyota Highlander Xu40. First, open the front passen…
How to Reset the Service Light on a 2013 Toyota Highlander
How to Reset the Service Light on a 2013 Toyota Highlander
Toyota Highlander (2008-2013 / Xu40) Today, you will learn how to reset the service light or oil light on a 2013 Toyota Highlander. Turn on the ignition and press the TRIP A button to se…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos