Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery of the Toyota Auris 1

Model: Toyota Auris E150 - Years 2007-2012
Part: Battery

In this short and simple guide, discover how to dismantle and replace the key remote battery for the first generation Toyota Auris. First, take the remote in hand and remove the physical key from inside it; then, pry off the sides to remove the rear cover, accessing the electronic board and the battery, as shown in the video. At this point, remove and replace the battery with a new one of the correct type (in this case, a CR 2032 3V); reassemble everything and fit the plastic rear cover.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Toyota Auris
How to Replace the Battery in a Toyota Auris
Toyota Auris (2012-2018 / E180) To replace the battery in a Toyota Auris, open the bonnet to access the components inside the engine bay. On the right side, you will find the batter…
How to Replace the Remote Battery in a Toyota Auris?
How to Replace the Remote Battery in a Toyota Auris?
Toyota Auris (2007-2012 / E150) To replace the battery in the remote for the Toyota Auris, use a tool to pry open the bottom of the device. Once this is done, you can open the remot…
How do you set the clock in the Toyota Auris?
How do you set the clock in the Toyota Auris?
Toyota Auris (2018-2024 / E210) It will be possible to change the clock of the Toyota Auris by turning on the instrument panel, inserting the ignition key into the corresponding slo…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos