Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery in a Toyota Camry?

Model: Toyota Camry Xv50 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

Replacing the remote battery in a Toyota Camry is very simple; let's see how to proceed in this tutorial. For this operation, you will need a replacement CR2016 battery and a small flathead screwdriver.

Start by locating the slot on the side of the upper ring, then insert the tip of the screwdriver into it and pry off the back cover of the remote. At this point, remove the central module and open it as well.

Finally, replace the battery, positioning it in the correct orientation, and reassemble everything by following the reverse procedure.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery for the Toyota Camry?
How to Replace the Remote Battery for the Toyota Camry?
Toyota Camry (2011-2019 / Xv50) In this video, you can see how to replace the remote battery for the Toyota Camry. This is a very simple operation; you only need a small flathead sc…
How to Replace the Key Fob Battery on a Toyota Camry
How to Replace the Key Fob Battery on a Toyota Camry
Toyota Camry (2006-2013 / Xv40) This video shows how to replace the battery in the key fob of a Toyota Camry. The process is very simple; you will only need a new flat battery, spec…
How to Replace the Key Fob Battery on a Toyota Camry?
How to Replace the Key Fob Battery on a Toyota Camry?
Toyota Camry (2018-2024 / Xv70) In this tutorial, you will learn how to replace the battery in the key fob for a Toyota Camry. For this simple and quick operation, you will only nee…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos