Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Etios
    4. : How to install rear tow hook in Toyota Etios?

Toyota Etios - Video tutorial

Model: Toyota Etios MK 1 - Years 2010-2023
Part: Accessory Kit
Operation: How to install rear tow hook in Toyota Etios?

Installing a tow hitch in the rear of the Toyota Etios is the simplest that exists as this car model already has a suitable predisposition for the installation of this important element. After purchasing the new tow hitch compatible with our vehicle, we must go to the rear of the car and locate the plate on which it is to be installed. Position it correctly, insert the two bolts supplied and tighten them carefully with an appropriately sized wrench. Done! We installed the towbar.


Posted on 8 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos