Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on a Toyota Yaris, turn the key to the on position, ensuring the warning light is illuminated. At this point, inflate all the tyres to the recommended pressure, which is stated on the sticker affixed to the driver's door pillar.

Once all the tyres are inflated, locate the button with the low pressure symbol on the dashboard under the steering wheel: by holding this button for a few seconds, the warning light will turn off.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on the Toyota Yaris?
How to Reset the Tyre Pressure Light on the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure light on the Toyota Yaris, first inflate the tyres to the correct pressure, which is indicated on the sticker attached to …
How to reset the tire pressure light on the Toyota Yaris
How to reset the tire pressure light on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) In this article today, we will show you how to reset the tire pressure light on the Toyota Yaris. For this operation, no tools or software are needed…
How to Reset the Tyre Pressure Light on the Toyota Yaris?
How to Reset the Tyre Pressure Light on the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) You can completely clear the tyre pressure light from the instrument cluster of the Toyota Yaris by turning on the ignition. Then, use the directiona…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos