Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Toyota Highlander xu50

Model: Toyota Highlander Xu50 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

This guide shows how to reset the service reminder light on the Toyota Highlander xu50. The procedure does not require any specialist tools. First, turn on the ignition.

Using the reset button on the trip meter, navigate to the "TRIP A" display. Now, turn off the ignition.

Press and hold the reset button on the trip meter and turn the ignition back on. Turn off and then back on the ignition again while still holding the button; at this point, you will hear the vehicle's chime indicating the start of the reset procedure, and a countdown will appear on the multifunction display.

At the end of the procedure, you will see the instruction to start the engine.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

Replacing the Battery of the Toyota Highlander Xu50
Replacing the Battery of the Toyota Highlander Xu50
Toyota Highlander (2014-2019 / Xu50) Follow this brief and simple guide to remove and replace the battery of the Toyota Highlander Xu50, following the instructions below. First, open the…
How to Reset the Maintenance Light on a 2019 Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) Follow these simple steps to manually reset the maintenance light on your 2019 Toyota Highlander. First, enter the cabin and locate the "Trip/Reset" …
How to Reset the Maintenance Light on the 2015 Toyota Highlander
How to Reset the Maintenance Light on the 2015 Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) In this new guide for your 2015 Toyota Highlander, you will learn how to correctly reset the maintenance light independently and without using any pr…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos