Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Toyota Corolla

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: Battery

In this brief and simple guide, follow the steps to remove and replace the battery in a Toyota Corolla. First, open the bonnet and disconnect the two battery terminals (positive and negative) by loosening the nuts with a 10 mm socket spanner. Next, use the same spanner to remove the nuts from the central mounting bracket, then lift and extract the battery as shown in the video. Now, replace the battery with a new one of the correct type (with the same amperage and cold cranking amps).

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Toyota Corolla
How to Replace the Battery in a Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) To replace the battery in a Toyota Corolla, open the bonnet and access the engine bay: the battery is located there, near the left front headlamp. On…
How to Replace the Battery in a Toyota Corolla Hybrid
How to Replace the Battery in a Toyota Corolla Hybrid
Toyota Corolla (2019-2026 / MK 5, E210) To replace the battery in a Toyota Corolla Hybrid, open the bonnet to access the components inside the engine bay. On the right side, you will find t…
How to Replace the Battery in a Toyota Corolla
How to Replace the Battery in a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) If the battery in your Toyota Corolla Mk2 is worn out and needs replacing, carefully read the following guide and follow the steps to do it yourself …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos