Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the License Plate Bulb on a Toyota Camry?

Model: Toyota Camry Xv50 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: License plate light

See other generations:
Video tutorial

To replace the license plate light bulb on a Toyota Camry, lift the trunk to remove the fasteners holding the carpet inside the trunk. Once the carpet is removed, you can access the connector connected to the interior dome light that contains the bulb.

By disconnecting the connector, you can pull the dome light out and open it to extract the bulb inside. After removing the old bulb, insert the new one into the dome light, reconnect it to the connector, and reinstall the carpet.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Toyota Camry
How to Replace the Headlight Bulb on a Toyota Camry
Toyota Camry (2006-2013 / Xv40) To replace the headlight bulb on a Toyota Camry, open the hood to access the components inside the engine compartment. Inside the headlight assembly,…
How to replace the headlight bulb of the 2009 Toyota Camry
How to replace the headlight bulb of the 2009 Toyota Camry
Toyota Camry (2006-2013 / Xv40) To replace the headlight bulb of your 2009 Toyota Camry on your own, simply follow the simple procedure described in the following guide. First, make…
How to Replace the Front Headlight Bulb on a Toyota Camry?
How to Replace the Front Headlight Bulb on a Toyota Camry?
Toyota Camry (2011-2019 / Xv50) To replace the front headlight bulb on a Toyota Camry, open the hood to access the back of the headlight. Here, you will find the connector attached …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos