Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Pads on a Toyota Yaris

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Brake pads

In this video tutorial, see how to replace the brake pads on a Toyota Yaris. First, purchase new brake pads from an authorised dealer. Next, lift the car using a jack and place axle stands under the vehicle for added safety. Remove the wheel, then unscrew the bolts of the brake caliper and take out the old brake pads. Install the new brake pads, push back the piston, and retract the caliper piston. Reposition the brake caliper, use thread lock, and then re-tighten the bolts. At this point, refit the wheel and lower the vehicle.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Front Disc and Pad Replacement
Front Disc and Pad Replacement
Toyota Yaris (1999-2005 / Xp10) Once the vehicle is lifted on a hydraulic lift, remove the front wheel; then proceed to remove the retaining pins of the brake caliper and detach it …
Replacing the Rear Brake Shoes on the Toyota Yaris
Replacing the Rear Brake Shoes on the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) In today's tutorial video, you will see how to remove and replace the rear brake shoes on the Toyota Yaris by following these simple steps. First, li…
How to Replace the Brake Pads of a Toyota Yaris
How to Replace the Brake Pads of a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Place your vehicle on axle stands, then remove the wheel in question. Now, remove the two bolts located on the back of the disc, which will free the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos