Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Car Brake Pads

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Brake pads

See other generations:
Video tutorial

The following guide shows how to replace the brake pads on your car, requiring a bit of free time and a pinch of patience, along with good manual skills. First, lift the car with a jack and remove the wheel by unscrewing the bolts.

You can then start removing the pads by leveraging the appropriate clip with a screwdriver. Next, proceed to extract the caliper by pulling it towards the rear of the car. You can then remove the two pads: the outer one is without a clip and can be easily removed, while the inner one is inserted into the piston and is removed by sliding it out perpendicularly.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

How to Replace Brake Pads on a Toyota Yaris
How to Replace Brake Pads on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) In this video tutorial, see how to replace the brake pads on a Toyota Yaris. First, purchase new brake pads from an authorised dealer. Next, lift the…
Replacing Front Brake Pads on a Toyota Yaris
Replacing Front Brake Pads on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) In today's video tutorial, you will learn how to replace the front brake pads on a first-generation Toyota Yaris. First, lift the vehicle and remove …
How to Remove the Front Brake Pads on a Toyota Yaris
How to Remove the Front Brake Pads on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) To remove the front brake pads on a Toyota Yaris, position your car on a column lift and raise it to a comfortable height for working. Unscrew the bo…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos