Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Calya
    4. : How to fit the automatic gear lever illumination lights on Toyota Calya?

Toyota Calya - Video tutorial

Model: Toyota Calya MK 1 - Years 2016-2023
Part: Dashboard
Operation: How to fit the automatic gear lever illumination lights on Toyota Calya?

If we intend to personalize the interior of the car, by mounting a light that illuminates the area around the automatic gear lever (after market lights), proceed as follows: extract the air flow and speed adjustment ring nuts of the air. Lower the gear lever and remove the rubber located under the handle, then remove the gear knob and with a screwdriver unscrew the screws located under the air flow adjustment seat, at which point release the clips and remove the grille of the bodywork. Take the bulb holder to be assembled and connect the two power supply wires of the bulb with the soldering iron. Refit the bulb holder and connect the power cables of the bulb to the car lighting system. Finally, reassemble all the components to complete the job.


Posted on 17 November 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos