Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset and adjust the tyre pressure on the Toyota Auris

Model: Toyota Auris E180 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset and adjust the tyre pressure on the Toyota Auris, start by turning on the instrument panel without starting the car. Under the steering wheel or beside the glove compartment (as shown in the video), find the "set" button, hold it down until the warning light on the dashboard stops flashing and turns off completely.

Once the warning light is off, you can turn off the instrument panel.

Now, you can register the tyre pressure by pressing the same button three times so that if there is an increase or decrease in pressure, the warning light will illuminate.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Toyota Auris?
How to Reset the Tyre Pressure Light on a Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the tyre pressure light on the Toyota Auris, inflate the tyres to the recommended pressure value, which is indicated on the sticker affixed …
How to Reset the Tyre Pressure Warning Light on a Toyota Auris
How to Reset the Tyre Pressure Warning Light on a Toyota Auris
Toyota Auris (2012-2018 / E180) This guide explains how to reset the tyre pressure monitoring system (TPMS) warning light on a Toyota Auris. Before performing the reset, ensure all …
How to reset the tyre pressure warning light on the Toyota Auris?
How to reset the tyre pressure warning light on the Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the tyre pressure warning light on the Toyota Auris, turn on the instrument panel after all tyres have been inflated to the correct pressure…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos