Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Lights on a Toyota Auris A180

Model: Toyota Auris E180 - Years 2012-2018
Part: Checks and maintenance

Let's see how to change the rear lights on a Toyota Auris A180: First, open the boot lid to access the two screws on the rear light clusters, which you will remove. Now, carefully push the light cluster forward from the front, being gentle. If necessary, use a bit of WD-40 to help the part slide on its guides. Disconnect the electrical connector to remove the light cluster from its housing. Next, remove the black plastic cap secured by four screws that holds the brake lamp block. This version has a light block that is not available commercially. However, LED lamps for the rear block of the Toyota Auris can be easily found on all e-commerce platforms at reasonable prices. The YouTuber then shows how to refit the light cluster, and the job is complete.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear lights of the Toyota Auris.
Replacement of the rear lights of the Toyota Auris.
Toyota Auris (2012-2018 / E180) Shortly, we will see the instructions that will allow us to disassemble and replace the bulbs of the rear light of the Toyota Auris. First, we open t…
Replacement of the rear headlight bulbs of the Toyota Auris
Replacement of the rear headlight bulbs of the Toyota Auris
Toyota Auris (2012-2018 / E180) Today's steps will show us how to disassemble and replace the rear taillight bulbs of the Toyota Auris. First, we open the rear hatch of the trunk an…
How do you remove the rear bumper of the Toyota Auris?
How do you remove the rear bumper of the Toyota Auris?
Toyota Auris (2007-2012 / E150) In order to remove the rear bumper of the Toyota Auris, you will need to use a tool to pry off the rivets located at the bottom of the bumper and ins…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos