Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : Where are the low beam fuses located in the Toyota Corolla?

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Headlight
Operation: Where are the low beam fuses located in the Toyota Corolla?

In the event that the headlights of our Toyota Corolla suddenly stop working, and the bulbs are in good condition, we can first of all check the state of the respective fuses whose location is indicated in this video. As shown, they are found in the box located inside the engine compartment and are labeled with the initials F51 and F52. The former relates to the left side while the latter to the right side. If faulty, make sure to replace them with spare parts of the same specifications and always operate with the vehicle off, so as not to cause any damage.


Posted on 23 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Corolla 2006-2013 - Why is the low beam headlight of the Toyota Corolla not working? Read Answer
    • Corolla 1995-2002 - What kind of bulb does it take for the sidelights of the Toyota Corolla Verso? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos