Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Headlamp Bulb on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Headlight

Learn how to easily change the front headlamp bulbs on a Toyota Yaris. Access the front light unit easily from the engine bay, as the bulbs are not covered; first, disconnect the connector, then remove the rubber cover that protects the bulb from moisture and dust. The bulb is held in place by a metal clip that can be removed easily. You can then take out the bulb to be replaced and insert the new one, which - remember - must never be touched with bare hands, or you risk shortening its lifespan. Refit the metal clip, the rubber cover, and the connector, and the job is complete.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlamp Bulb on a Toyota Yaris Hybrid
How to Replace the Headlamp Bulb on a Toyota Yaris Hybrid
Toyota Yaris (2011-2019 / Xp130) To replace the headlamp bulb on the Toyota Yaris Hybrid, open the bonnet to access the components inside the engine bay. Specifically, pull the bulb …
How to Replace the Front Headlight Bulb on a Toyota Yaris
How to Replace the Front Headlight Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) This short video will show you how to remove and replace the front headlight bulb on a Toyota Yaris, following these simple steps. First, open the bo…
How to Replace the Dipped Beam Bulb on a Toyota Yaris?
How to Replace the Dipped Beam Bulb on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the dipped beam bulb on your Toyota Yaris, start by opening the bonnet and securing it with the prop rods. Locate the headlamp where the b…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos