Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on the Toyota Corolla

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Battery

To replace the battery on this vehicle DIY style, refer to the instructions in this description and use the images from the tutorial video. The first step is to open the bonnet and locate the battery, which is on the right side behind the headlamp. Start by unscrewing the nuts securing the top mounting plate of the battery. Then, loosen the negative terminal followed by the positive terminal, and remove the battery from its housing. Take the new battery, ensuring that the amperage is the same, and position it in the compartment. Connect the positive terminal first, then the negative terminal, and reattach the nuts securing the mounting plate.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Remote Battery on a Toyota Corolla 5
How to Change the Remote Battery on a Toyota Corolla 5
Toyota Corolla (2019-2026 / MK 5, E210) If the remote for your latest Toyota Corolla has stopped working and you have confirmed that the issue is simply a dead battery, then follow the proc…
How to change the battery of the 2019 Toyota Corolla key.
How to change the battery of the 2019 Toyota Corolla key.
Toyota Corolla (2013-2019 / MK 4, E170, E160) In this article, we will see how to change the battery of the 2019 Toyota Corolla key. For this operation, a flathead screwdriver will be necessary. …
How to replace the battery of the Toyota Corolla key
How to replace the battery of the Toyota Corolla key
Toyota Corolla (2000-2007 / MK 2) The steps to replace the battery of the Toyota Corolla remote control are simple and quick to perform. Before proceeding, let's get a CR 2032 model b…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos