Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Toyota Prius C Aqua

Model: Toyota Prius C Aqua MK 1 - Years 2011-2021
Part: Service warning light

This guide shows how to reset the service light on the Toyota Prius C Aqua Mk1. To perform this operation, turn on the ignition and press the "Trip" button until the "ODO" message appears on the display. At this point, turn off the ignition by pressing the power button. Wait a few seconds for the display to turn off completely. Now, press the power button three times, and on the last press, hold down the "Trip" button until the service counter, located at the top left of the display, resets to zero. You can now turn off the ignition.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Coolant in the Toyota Prius C Aqua
Guide to Replacing the Coolant in the Toyota Prius C Aqua
Toyota Prius C Aqua (2011-2021 / MK 1) In today's tutorial video, you will see the steps to bleed and refill the engine coolant in the Toyota Prius C Aqua. First, open the hood of your car…
How to Remove the Plastic Dashboard Cover on a Toyota Prius C Aqua
How to Remove the Plastic Dashboard Cover on a Toyota Prius C Aqua
Toyota Prius C Aqua (2011-2021 / MK 1) Here are the main instructions for removing and replacing the central plastic cover of the dashboard on a Toyota Prius C Aqua. First, get inside the …
How to Clean the Battery Terminals of the Toyota Prius C Aqua?
How to Clean the Battery Terminals of the Toyota Prius C Aqua?
Toyota Prius C Aqua (2011-2021 / MK 1) Not everyone knows there is a very simple way to keep the battery cell terminals on the Toyota Prius C Aqua clean and efficient without spending a lo…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos