Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Dipped Headlight Bulb on a Toyota Yaris 2

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Headlight bulb

See other generations:
Video tutorial

This brief video guide shows all the steps necessary to replace the dipped headlight bulbs on a second-generation Toyota Yaris, produced from 2005 to 2011. First, open the vehicle's bonnet. Once done, disconnect the bulb connector from the back of the headlamp and remove the rubber dust seal.

Now, move the metal tab that holds the bulb in place, then remove the bulb and replace it with a new one. Finally, reverse the steps to reassemble everything.


Updated on 8 July 2026 by ScegliAuto


Related tutorials

How to Change the Dipped Beam Bulb on a Toyota Yaris
How to Change the Dipped Beam Bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) This short video guide explains how to change the dipped beam bulb (H4) on a second-generation Toyota Yaris, produced from 2005 to 2011. First, open …
How to Replace the Dipped Beam Bulb on a Toyota Yaris
How to Replace the Dipped Beam Bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) This short video tutorial shows how to change the dipped beam bulb on a second-generation Toyota Yaris, produced from 2005 to 2011. First, open the b…
How to Replace the Dipped Beam Bulb on a Toyota Yaris?
How to Replace the Dipped Beam Bulb on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the dipped beam bulb on your Toyota Yaris, start by opening the bonnet and securing it with the prop rods. Locate the headlamp where the b…

Other guides you may be interested in

How to reset the service light on a Lancia Ypsilon?

When the service light comes on in a Lancia Ypsilon, as with any vehicle, it indicates that the car needs servicing, including an oil change and oil filter replacement. The vehicle shown in the video, the Lancia Ypsilon, can be easily maintained by yourself; changing the engine oil is not a complex task, nor is resetting the aforementioned light. Here’s the reset procedure: Turn on the ignition, press the accelerator pedal down, and press the brake pedal seven times. After this, wait sixty seconds, release the accelerator, and turn off the ignition. Reset completed.

Watch the video!


by ScegliAuto

More videos