Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Toyota Aygo?

Model: Toyota Aygo Ab40, MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure light on a Toyota Aygo, first turn on the ignition by rotating the key in the ignition switch. Once the display is on, open the glove compartment located on the passenger side and locate the tyre pressure button at the top left.

Press and hold this button for a few seconds until the corresponding light on the display disappears. After completing the operation, you can turn off the ignition.


Updated on 20 July 2026 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will see the main instructions that will allow you to reset the tyre pressure warning light on the Toyota Aygo X; before performing…
How to reset the tyre pressure warning light on the Toyota Aygo?
How to reset the tyre pressure warning light on the Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) The button to reset the tyre pressure warning light on the Toyota Aygo is located inside the glove compartment. Once opened, you should be able to lo…
How to Reset the Tyre Pressure Light on the Toyota Aygo?
How to Reset the Tyre Pressure Light on the Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) To reset the tyre pressure light on the Toyota Aygo, first ensure all tyres are inflated to the recommended pressure: the recommended pressure value …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos