Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Battery in a Toyota GT86?

Model: Toyota Gt86 ZC6, ZN6 - Years 2012-2021
Part: Key

To quickly and independently replace the battery in your Toyota GT86 key, follow these steps. First, obtain a flat screwdriver. Take your key, locate the slot at the bottom of the cover, and insert the screwdriver tip inside to fully open the key. At this point, remove the battery holder and also open it with the screwdriver to access the exhausted battery. Finally, replace it with a new one (model CR2016) and you are done.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Gt86 (2012-2021 / ZC6, ZN6) If you own a Toyota GT86 and want to find out where the fuse box of the car is located, all you have to do is read the following guide and follow the…
Toyota Gt86 (2012-2021 / ZC6, ZN6) To disable the traction control on the Toyota GT86, turn on the ignition by turning the key in the ignition switch. Once the dashboard lights up, pre…
Toyota Gt86 (2012-2021 / ZC6, ZN6) In this video we can see where the fuse boxes of the Toyota GT86 are located and what the corresponding diagrams are, useful in case we need to check…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos