Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable Traction Control on the Toyota GT86?

Model: Toyota Gt86 ZC6, ZN6 - Years 2012-2021
Part: Checks and maintenance

To disable the traction control on the Toyota GT86, turn on the ignition by turning the key in the ignition switch. Once the dashboard lights up, press the brake pedal three times in a row. Next, pull and release the handbrake three times. After that, press the brake pedal three more times. Doing this will disable the car's traction control, and the corresponding warning light on the dashboard will illuminate.

Updated on 1 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Removal and Replacement of the Control Arm.
Removal and Replacement of the Control Arm.
Toyota Gt86 (2012-2021 / ZC6, ZN6) Place the car on a ramp or use a jack to lift the front end. Remove the front tyre. Locate the control arm and its mounting points. Unscrew the two b…
Where is the fuse box of the Toyota GT86 located?
Where is the fuse box of the Toyota GT86 located?
Toyota Gt86 (2012-2021 / ZC6, ZN6) If you own a Toyota GT86 and want to find out where the fuse box of the car is located, all you have to do is read the following guide and follow the…
How to Replace the Key Battery in a Toyota GT86?
How to Replace the Key Battery in a Toyota GT86?
Toyota Gt86 (2012-2021 / ZC6, ZN6) To quickly and independently replace the battery in your Toyota GT86 key, follow these steps. First, obtain a flat screwdriver. Take your key, locate…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos