Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota RAV4

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Service warning light

In this mini guide dedicated to your Toyota RAV4 third generation (2006-2013), discover how to reset the service light. First, enter the vehicle and turn on the ignition. Then, press the "ODO/Trip" button located at the bottom of the rev counter several times and locate the "Trip A" option on the instrument cluster display. At this point, turn off and then turn on the ignition again while simultaneously holding down the button used previously. Wait a moment and release it as soon as the reset is successfully completed.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset maintenance light on 2007 Toyota RAV4
How to reset maintenance light on 2007 Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) This video shows how to reset the maintenance light on your 2007 Toyota RAV4. To reset the light, first start the instrument panel and make sure it i…
How to reset the "Service" light on a Toyota Rav4?
How to reset the "Service" light on a Toyota Rav4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To reset the "Service" light on a Toyota RAV4, start by turning on the instrument panel without starting the engine. Use the buttons on the steering …
How to reset the "Service" light on a Toyota RAV4?
How to reset the "Service" light on a Toyota RAV4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To reset the "Service" light on a Toyota RAV4, turn on the dashboard without starting the engine. Use the buttons on the steering wheel, specifically…

    Frequently Asked Questions

    • Rav 4 2000-2006 - What does the oil light of the Toyota RAV4 indicate? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos