Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wheel Bearing

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Bearing

See other generations:
Video tutorial

After positioning the car on one or more axle stands, remove the affected wheel. Using a rubber mallet and a screwdriver, extract the brake drum.

You will also need 8mm bolts to use as extractors by screwing them into the appropriate threads. Apply some penetrating oil to the rear bolts holding the bearing to the hub and unscrew them, taking care not to grease the brake shoes.

Use the mallet to complete the removal of the old bearing and proceed with the installation of the new one. The tools required for the operation are: - Penetrating spray - Rubber hammer - 12mm spanner and socket - Flat screwdriver - Torch - 8mm bolts - Jack and axle stands The video refers to a Toyota Yaris, but the procedure is similar for all vehicles with rear drum brakes.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wheel Bearing of the Toyota Yaris
How to Replace the Rear Wheel Bearing of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Here are the instructions to remove and replace the rear wheel bearing of the Toyota Yaris, following these simple steps. First, lift the vehicle at …
Replacement of the Rear Wheel Hub Bearing
Replacement of the Rear Wheel Hub Bearing
Toyota Yaris (1999-2005 / Xp10) Replacing the rear wheel hub bearing is straightforward as the bearing is integrated into the hub itself, and no press is needed for extraction or in…
How to Replace the Front Wheel Bearing on a Toyota Yaris?
How to Replace the Front Wheel Bearing on a Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) To replace the bearing on a Toyota Yaris, loosen the bolts securing the front wheel corresponding to the bearing to be replaced and remove it complet…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos