Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Rear Wheel Hub Bearing

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Bearing

Replacing the rear wheel hub bearing is straightforward as the bearing is integrated into the hub itself, and no press is needed for extraction or insertion. Once the vehicle is raised, remove the rear wheel and take off the drum. Then, unscrew the four bolts securing the hub to its support and extract it along with the bearing. Insert the new hub and secure it by tightening the four fixing bolts, applying a few drops of thread lock. Spray copper grease before repositioning the drum and remounting the wheel.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Bearing on a 2005 Toyota Yaris
How to Change the Rear Bearing on a 2005 Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Replacing the rear hub bearing is straightforward as the bearing is sold complete with the hub; therefore, lift the vehicle, remove the wheel and bra…
How to Replace the Front Wheel Bearing on a Toyota Yaris?
How to Replace the Front Wheel Bearing on a Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) To replace the bearing on a Toyota Yaris, loosen the bolts securing the front wheel corresponding to the bearing to be replaced and remove it complet…
How to Remove the Rear Bearing from a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video, see how to remove the rear bearing from a Toyota Yaris. Position your car on a column lift, loosen the bolts with a socket wrench, and…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - How long does it take to replace the Toyota Yaris rear wheel bearing? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos